Glossary
1 MIN READ
Crowning
A deliberate, slightly barrel-shaped profile machined into the center of a roll to compensate for mechanical deflections under heavy load, ensuring uniform pressure distribution.
Technical FAQ
Eliminating material waste and avoiding secondary cutting operations is a primary goal for high-productivity job shops looking to protect their margins. A flat end is the straight, unbent section left at the leading and trailing edges of a plate because the material cannot physically reach the exact tangent contact point between the machine rolls. Minimizing this straight section directly reduces material scrap and eliminates the time-consuming process of pre-bending plates on a separate press brake, thereby accelerating overall floor cycle times. Utilizing Davi all-rolls-drive technology ensures the plate can be positioned precisely at the tangent point to achieve the shortest flat end possible without compromising safety.
Inaccurate radius tracking due to material elasticity leads to continuous trial-and-error adjustments, resulting in costly scrap and slow assembly lines. Spring-back is the natural tendency of a metal plate or profile to partially return toward its original flat shape after the forming force is released, caused by elastic recovery. Accurate spring-back prediction allows the control system to over-bend the plate precisely, achieving the exact target radius on the first attempt without wasting time or material. Davi offers dedicated Spring-Back Software that analyzes material properties to eliminate manual guesswork and minimize test scrap.
Unpredicted cracking along the longitudinal axis of high-strength plates disrupts operational continuity and increases material costs. Grain direction is the orientation of metal crystals elongated during the initial mill rolling process, meaning that rolling perpendicular to the grain requires more force but reduces cracking risks, while rolling parallel requires less force but increases material fragility. Aligning the plate correctly based on grain orientation ensures repeatable geometries, speeds up cycle times, and protects the mechanical integrity of the workpiece. Davi's iRoll eXtreme system allows operators to input material directional variables to optimize automated cycles.
Fabricators must prevent "barrel effect" or "hourglass" distortion across the width of a rolled plate to ensure proper assembly fitment. Crowning is a subtle, precise convex profile machined into the center of a roll to counteract the physical deflection that occurs when the roll is subjected to heavy forming loads. It ensures completely uniform pressure distribution across the entire width of the plate, guaranteeing consistent tolerances from edge to edge. Davi custom-engineers roll crowning profiles based on specific customer material mixes to optimize precision.